Industrial sheet metal fabrication
Outdoor Electrical Enclosures Built for Harsh Conditions
Protect electrical components from persistent sun, driving rain, and temperature swings with outdoor enclosures engineered for reliable fabrication and practical access.
- 01Sloped Drip Shield top to direct water away from doors and seams
- 02UV-stabilized powder coating for outdoor color and finish retention
- 03Dust- and water-resistant covers for lock housings
- 04Double-layer internal insulation to limit condensation
Weather-ready by design
Outdoor protection details are incorporated during DFM review so they are accounted for in the part files and production workflow.
10–500
Typical production runs with recurring annual releases
4–6 m
Machinery frames supported for larger skid assemblies
2500 × 6000 mm
In-house powder coating and curing line capacity
One facility workflow
From raw stock to finished enclosure
Material verification and 3D model review begin the process. Cutting, forming, hardware insertion, welding, and coating follow under one roof to help reduce dimensional drift between operations.
-
01
Review & verify
Check incoming material grade and thickness; review 3D models for manufacturability.
-
02
Laser profile
Precisely cut panels and structural members from steel, stainless steel, or aluminum.
-
03
Form & insert
Use multi-axis press brakes and automated insertion for PEM nuts, studs, and standoffs.
-
04
Weld & finish
Join frames and covers, then pretreat and powder coat in-house with thermal curing.
-
05
Inspect & pack
Verify the finished enclosure before crating and preparing it for delivery.
Outdoor-specific construction
Built to shed water and resist exposure
Protection features are considered early in DFM, helping address rain, UV exposure, and condensation without adding avoidable downstream operations.
Discuss Your EnclosureSloped Drip Shield
Formed tops direct water away from door edges and seams, helping protect enclosure access points during heavy rain.
UV-stabilized outdoor coating
Outdoor-specific powder formulations are selected for color retention and chalk resistance under prolonged sun exposure.
Covered lock housing
Separate dust and water covers help shield lock hardware while keeping the enclosure accessible.
Double-layer insulation
An internal panel and air gap help limit condensation on the inner skin when temperatures change quickly.
Equipment and production capacity
A broad equipment base supports compact electronic chassis, outdoor cabinets, and large structural assemblies.
Applications and production fit
Suitable for teams producing battery energy storage systems, solar inverters, traffic control cabinets, and outdoor switchgear. Typical runs range from 10 to 500 units with recurring annual releases; larger 4–6 meter machinery frames are also supported for skid assemblies.
With coating and final inspection in-house, powder color or hardware changes can be implemented without new vendor qualification.
Quality checkpoints
Inspection built around delivery confidence
Checks throughout the production sequence help reduce the chance of rework after parts reach your site.
Incoming material
Sheet thickness and material grade checks on arrival.
First article
Initial parts measured against the 3D model before the run begins.
In-process controls
Bend angles, hardware torque, and weld continuity checks.
Final 100% inspection
Gasket fit, door operation, and coating thickness verified before crating.
Frequently asked questions
What information should I send for a quotation?+
Send your drawings or 3D models along with project quantity, finish requirements, and any special mounting details.
Can the outdoor features be included in the design review?+
Yes. Drip Shield geometry, outdoor coating, lock covers, and double-layer insulation can be considered during DFM review.
Can you accommodate finish or hardware changes?+
In-house coating and final inspection allow powder color and hardware changes to be handled within the production workflow.
Start your project
Request pricing and lead time
Share drawings or 3D models, project quantity, and any special finish or mounting requirements. We review manufacturability and material availability, then prepare a firm quotation for your enclosure.
Email: info@enclosuremfg.com
Sample shipments and site visits: Building 4, Kuiqing Road, Qingxi Town, Dongguan City, Guangdong Province